Marine order 15—Construction—fire protection, fire detection and fire extinction

Marine order 15 implements internationally consistent standards for the construction of fire equipment on vessels related to protection, detection and extinction. 

International vessels visiting Australian ports may be subject to a port State control inspection to ensure they meet these standards.

Related content

• What is port State control?
• Port State control in Australia
• Common deficiency issues for fire fighting equipment 

• International Convention for the Safety of Life at Sea (SOLAS) – Chapter II-2 (search, register or borrow)
• International Code for Fire Safety Systems (FSS Code) and IMO resolution MSC.98(73) amended by MSC.206(81), MSC.217(82), MSC.327(90) and MSC.367(98)
• International Code for Application of Fire Test Procedures (FTP Code), IMO resolution MSC.307(88) Corr.1
• National Standard for Commercial Vessels (NSCV)
• Number and arrangement of portable fire extinguishers on board ships (unified interpretation of SOLAS Chapter II-2), IMO circular MSC.1/Circ.1275 (you will need to register with the IMO to access this document)
• Recommendations for the Safety of Cargo Vessels of less than Convention Size; International Association of Classification Societies (IACS) Recommendation No. 99 (2007) 
• Respiratory protective devices (borrow or purchase), AS/NZS 1716:2012
• Improved guidelines for marine portable fire extinguishers, IMO resolution A.951(23) 
• Revised guidelines on maintenance and inspection of fire protection systems and appliances, IMO circular MSC.1/Circ.1432 (you will need to register with the IMO to access this document)
• Selection, use and maintenance of respiratory protective equipment (borrow or purchase), AS/NZS 1715:2009
• Test methods for electric cables, cords and conductors – Fire tests – Test for vertical flame propagation for a single insulated wire or cable (borrow or purchase), Australian Standard AS/NZS 1660.5.6:2005
• Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm (borrow or purchase), IEC 60331-1 Ed 1.0 2009-5
• Tests for electric cables under fire conditions – Circuit integrity – Part 21: Procedures and requirements – Cables of rated voltage up to and including 0,6/1,0 kV. (borrow or purchase), IEC 60331-21 Ed 1.0 1999-04
• Uniform Shipping Laws Code (USL Code)